Position the tape roll so that it will unwind with the sticky side facing down as the dispenser is pulled backwards. The dispenser will then be ready to use.

How To Replace Scotch Tape Dispenser Gun Packaging Change Youtube

Packing tape dispenser how to load diagram.

How to load scotch packaging tape dispenser. Locate the end tab of the Scotch packing tape roll. A cut will be made and the tape will stay against the cutting bar for the next section to be pulled. Find the end of the scotch tape.

Lay the tape wheel flat on the table. Loosen the nut on the wheel this just makes it easier to pull on the tape less tension put the tape on the wheel pull on it for a few inches then slide the strip of tape between the rubber the peice of metal. Apply tape end firmly to the box.

Some packing tape dispensers have a shield that slides down to allow for the tape. Make sure to keep constant contact with roller and box. Tape roller and metal loading gate.

Pull tape under the tape roller If tape does not unwind properly see Diagram B increase or decrease tension. Go for a test trial instead and see if the dispenser is loaded and adjusted properly. Keep tightening and loosening up the nuts until the tape is rolled out smoothly.

Here are the steps. Figure 2 - Pivot brake to open position. Ensure the unwinding tape rotation is sticky side down.

Generally the end is clearly marked if you are loading a new roll. Press the tape against the blade and rotate the gun downwards to remove the section of tape youre holding. Holding the tape secure or taped against a box press the plastic guard against the tape.

Having trouble loading your Scotch Brand Heavy Duty Packaging Dispenser. Be careful not to come into contact with the blade while shearing the tape. If the spindle is even a bit too loose you will end up using more scotch tape.

Test the dispenser on a disposable surface nearby like a piece of scrap paper or unused cardboard box. To slide the tape into the spindle place the packaging tape dispenser. If the roll is a used one then run your fingernail around it to see where the end is located.

Figure 3 - Bring tape up and around roller and pull back slightly to one side to cut off excess tape. Loading Instructions Figure 1 - Place tape roll fully onto tape drum to dispense tape forward from top of roll. Place the sticky end of.

The sticky side of the tape should face down. Simple Steps Guide To Load Scotch Packing Tape Dispenser 1Locate where the tape roll ends. If youre loading a new roll the end should be clearly marked.

Place tape gun 4-5 in. Thread tape between roller and brake. Pull the front tab of the tape roll through the slot between the dispenser roller and shield.

But the method on how to load a packing tape dispenser still follows the same concept with a few differences. Then pull a section toward the front cutting bar and past it a few inches. If a new roll is being loaded the end must be properly marked.

How To Operate Your Packing Tape Gun. If youre working with a used roll run a fingernail around the tape to feel for where the end is. Pull the tape up across the tape blade being careful not to cut yourself on the tape blade.

Pull the front end of the tape roll through the slot between the dispenser. Push the tape on the wheel. Insert the roll of packing tape onto the large dispenser wheel on the top-right of the tape dispenser with its handle grip to the right.

To load a packing tape dispenser position the tape so that it will unwind counterclockwise secure the tape onto the dispenser wheel thread the end of the tape through the slot between the dispenser and the shield then cut the end of the tape across the tape blade. From top of box. Align the roll of Packaging Tape so that it unwinds counter-clockwise over the dispenser reel.

You will start off by inserting your roll of packaging tape ie scotch onto the big dispenser wheel. Many packing tape dispensers have an adjustable tensioner to make unwinding smooth according to Packaging Tape. Place the Scotch packing tape roll onto the dispenser.

Watch this demo to learn how. Pull six inches off the roll. Glide the roller and tape across the surface at the carton seam.

How to Use Scotch Packing Tape Dispenser Step 1. Pull tab to remove and discard blade protection. After loading the tape onto the roll do NOT start using it right away.

Rapescos 960 dispenser is quick and easy to load too. Locate the end of your roll of tape. Pull 02505 inches 064127 cm of tape and fold it back on the roll.

Thread this tape through the forward slot still facing down. 2Sliding into the spindle. Pull out the tape so that the sticky end rests against the end of the dispenser with the cutting blade.